Activity 1 For each of the non-destructive testing methods shown below list one major limitation to its use: a. Visual test. b. Die Penetrant test. c. Magnetic test d. Ultrasonic test e. Radiographic test. Use the engineering materials
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
a.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b.Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
.c.n-situ metallography is performed as NDT on actual site with a team comprising of expert metallographers and metallurgists.
d.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e.Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a -Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b -is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c-The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
e-Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
4. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software. b-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials MOHAMMED HAMAD 11-06
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Visual test ;originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
Die Penetrant test ;is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
Magnetic test;cards are paper or plastic cards with an attached magnetic stripe
Ultrasonic test ;very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
Radiographic test ;is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as cracks,suface porosities, and leaks in new products, and fatigue cracks on in-service components.
The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field. This unique building was designated a National Historic Landmark in 1985 [3].
In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
a.Visual test is considered the most important non- destructive test, it will result in the discovery of the vast majority of defects which could be found later using some other more expensive NDT methods.
b.Die penetrant test is used to locate discontinuities which are opened to surface (surface discontinuities). This is done by applying a penetrant to the cleaned surface of the test piece.
c.Magnetic particles test method is used primarily to discover surface discontinuities in ferromagnetic materials, however indications can be observed as well from subsurface discontinuities which are very close to the surface.
d.Ultrasonic testing (UT) is an inspection method which uses sound waves, well above the range of human hearing, to measure geometric and physical properties in materials. Sound waves travel at different speeds in different materials.
e.The radiographic test involves passing gamma rays through a part and onto light sensitive film to detect internal flaws (cracks, pores, etc.). It is widely used in the inspection of critical parts and material.
1-Visual test: originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2- Die Penetrant test: is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
3-Magnetic test: at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
4-Ultrasonic test: very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5-Radiographic test: is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1-some times small creaks can't bee seen 2-it can only tells if there is serfs creaks 3-it only discovers surfes creaks 4-expensive,complected shape,need a expert 5-you can not know how far the creak is
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Magnetic particles test method is used primarily to discover surface discontinuities in ferromagnetic materials, however indications can be observed as well from subsurface discontinuities which are very close to the surface.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a -Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b -is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c-The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
e-Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
abdullah ibrahim mohammed alhammadi 11-08 st1011090126
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radio graphic testing (NR) is a variant of radio graphic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Die Penetrant test: also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
Visual test ;originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
Die Penetrant test ;is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
Magnetic test;cards are paper or plastic cards with an attached magnetic stripe
Ultrasonic test ;very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
Radiographic test ;is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
a.Visual test is considered the most important non- destructive test, it will result in the discovery of the vast majority of defects which could be found later using some other more expensive NDT methods.
b.Die penetrant test is used to locate discontinuities which are opened to surface (surface discontinuities). This is done by applying a penetrant to the cleaned surface of the test piece.
c.Magnetic particles test method is used primarily to discover surface discontinuities in ferromagnetic materials, however indications can be observed as well from subsurface discontinuities which are very close to the surface.
d.Ultrasonic testing (UT) is an inspection method which uses sound waves, well above the range of human hearing, to measure geometric and physical properties in materials. Sound waves travel at different speeds in different materials.
e.The radiographic test involves passing gamma rays through a part and onto light sensitive film to detect internal flaws (cracks, pores, etc.). It is widely used in the inspection of critical parts and material.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Visual Test: originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
Dye penetrant inspection (DPI): also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
Ultrasonic Testing (UT): uses high frequency sound energy to conduct examinations and make measurements.
Radiographic Testing (RT): or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils. saeed ahmed 11-10
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Spacecraft Magnetic Test: Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
b. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
Hazza Hamad AlHajri 11-06
ReplyDeletea.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb.Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
.c.n-situ metallography is performed as NDT on actual site with a team comprising of expert metallographers and metallurgists.
d.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e.Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Ali AbdulHameed 11-06
a -Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb -is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c-The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
e-Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
4. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
hussain zaid
ReplyDelete11-06
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
MOHAMMED HAMAD 11-06
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Fahad Khalifa Bamaes
11-06
90018
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
abdullah mohammed almuhiri
11-06
90008
Visual test ;originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteDie Penetrant test ;is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
Magnetic test;cards are paper or plastic cards with an attached magnetic stripe
Ultrasonic test ;very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
Radiographic test ;is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
hamdan obaid hableel 11-6
Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteDye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capability. LPI is used to detect casting, forging and welding surface defects such as cracks,suface porosities, and leaks in new products, and fatigue cracks on in-service components.
The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field. This unique building was designated a National Historic Landmark in 1985 [3].
In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
Radiographic test
mohamed fahad
90276
11-06
a.Visual test is considered the most
ReplyDeleteimportant non- destructive test, it
will result in the discovery of the vast
majority of defects which could be
found later using some other more
expensive NDT methods.
b.Die penetrant test is used to locate discontinuities which are opened to
surface (surface discontinuities). This is done by applying a penetrant to the
cleaned surface of the test piece.
c.Magnetic particles test method is used primarily to discover surface
discontinuities in ferromagnetic materials, however indications can be
observed as well from subsurface discontinuities which are very close to the
surface.
d.Ultrasonic testing (UT) is an inspection method which uses sound waves,
well above the range of human hearing, to measure geometric and physical
properties in materials. Sound waves travel at different speeds in different
materials.
e.The radiographic test involves passing gamma rays through a part and onto
light sensitive film to detect internal flaws (cracks, pores, etc.). It is widely
used in the inspection of critical parts and material.
ahmed binishaq 11-06
Name: ali Hassan
ReplyDeleteGrade:11-06
1-Visual test: originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
2- Die Penetrant test: is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
3-Magnetic test: at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
4-Ultrasonic test: very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5-Radiographic test: is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
1-some times small creaks can't bee seen
ReplyDelete2-it can only tells if there is serfs creaks
3-it only discovers surfes creaks
4-expensive,complected shape,need a expert
5-you can not know how far the creak is
abdul-rahman al-blooshi
11-06
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Hamed AlTamimi 11-06
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
Mohammed Ali 11-06
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Hamdan saeed al ghenaimi
11-08
Magnetic particles test method is used primarily to discover surface
ReplyDeletediscontinuities in ferromagnetic materials, however indications can be
observed as well from subsurface discontinuities which are very close to the
surface.
Abdullah saeed alhashmi
11-8
90133
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
saif abdullah alsaadi
.
.11-08
st1011090128
(a) Visual inspection will examine only
ReplyDeletesurface defects, however internal and
subsurface defects could be identified
using other NDT methods.
haj AL Tamimi
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
a -Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb -is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c-The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
e-Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
abdullah ibrahim mohammed alhammadi
11-08
st1011090126
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radio graphic testing (NR) is a variant of radio graphic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
Ahmed Abdulqader
11-08
ST1011090161
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Mohammad Abdulla AL Hammadi .
11-08
ID:80214
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Ali Ibrahim Alzaabi
11-08
st1011090146
Die Penetrant test:
ReplyDeletealso called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
Visual test ;originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteDie Penetrant test ;is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials
Magnetic test;cards are paper or plastic cards with an attached magnetic stripe
Ultrasonic test ;very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials
Radiographic test ;is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
abdullah ibrahim lutfi
11-08
90163
a>originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb>is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics)
c>The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecra
d>n ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e>Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Abdulla fadhel
grade 11-08
id 90150
This comment has been removed by the author.
ReplyDeletea. Visual test: is searching for any damage on the surface of the work piece with the naked eye.
ReplyDeleteb. Die Penetrant test:is searching for any damage on the surface of the work piece with the a special dye.
c. Magnetic test: is searching for any damage on surface of the work piece with a magantic particals.
d. Ultrasonic test: is searching for any damage in work piece with an sound waves that can help the engineer too much.
e. Radiographic test:is searching for any damage in work piece by taking a photo using X-ray.
sultan naser alzaabi
11-08
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
ibrahim mohammed alhosani
11-8
90288
a- originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb-is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
c-at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d-very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
e- is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials
mohammed ahmed alshehhi
11-08
a.Visual test is considered the most
ReplyDeleteimportant non- destructive test, it
will result in the discovery of the vast
majority of defects which could be
found later using some other more
expensive NDT methods.
b.Die penetrant test is used to locate discontinuities which are opened to
surface (surface discontinuities). This is done by applying a penetrant to the
cleaned surface of the test piece.
c.Magnetic particles test method is used primarily to discover surface
discontinuities in ferromagnetic materials, however indications can be
observed as well from subsurface discontinuities which are very close to the
surface.
d.Ultrasonic testing (UT) is an inspection method which uses sound waves,
well above the range of human hearing, to measure geometric and physical
properties in materials. Sound waves travel at different speeds in different
materials.
e.The radiographic test involves passing gamma rays through a part and onto
light sensitive film to detect internal flaws (cracks, pores, etc.). It is widely
used in the inspection of critical parts and material.
majed abdulle
11-08
st1011090151
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
OMRAN AHMED SALEM
11-10
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
khamis husain al housani 11-10
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
MABROOK SALEM ALI
11-10
90237
Visual Test: originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteDye penetrant inspection (DPI): also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
Ultrasonic Testing (UT): uses high frequency sound energy to conduct examinations and make measurements.
Radiographic Testing (RT): or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Khaled Hisham Al Hasani
ID: 1011090226
11-10
1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
saeed ahmed 11-10
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Mohamed Ali Al-Awlaqi
11-10
90164
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Mohammed almehrezi
11-10
st1011090251
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
sultan al housani
11-10
1.Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics). The penetrant may be applied to all non-ferrous materials and ferrous materials, but for inspection of ferrous components magnetic-particle inspection is also preferred for its subsurface detection capabilit.
3. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4.In ultrasonic testing (UT), very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials. The technique is also commonly used to determine the thickness of the test object, for example, to monitor pipework corrosion.
5. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
مروان المرزوقي
Spacecraft Magnetic Test: Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field
ReplyDelete1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
This comment has been removed by the author.
ReplyDelete1. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDelete2. widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics).
3. The building is constructed on non-magnetic materials and contains a magnetic coil system that allows the cancellation of the Earth's magnetic field.
4. very short ultrasonic pulse-waves with center frequencies ranging from 0.1-15 MHz and occasionally up to 50 MHz are launched into materials to detect internal flaws or to characterize materials.
5 .Either an X-ray machine or a radioactive source (Ir-192, Co-60, or in rare cases Cs-137) can be used as a source of photons. Neutron radiographic testing (NR) is a variant of radiographic testing which uses neutrons instead of photons to penetrate materials. This can see very different things from X-rays, because neutrons can pass with ease through lead and steel but are stopped by plastics, water and oils.
abdullah rabei ali 11-6
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.
Fahad Amer Al-Busaeedi
ReplyDelete90117
11-08
a. Visual Test, originally known as MS-Test, was an automated testing tool for Windows applications developed by Microsoft and later sold to Rational Software.
ReplyDeleteb. Dye penetrant inspection (DPI), also called liquid penetrant inspection (LPI) or penetrant testing (PT), is a widely applied and low-cost inspection method used to locate surface-breaking defects in all non-porous materials (metals, plastics, or ceramics
c. The Spacecraft Magnetic Test Facility at the Goddard Space Flight Center in Greenbelt, Maryland was built in 1966 to allow the evaluation of magnetic movement in spacecraft
d. Ultrasonic Testing (UT) uses high frequency sound energy to conduct examinations and make measurements.
e. Radiographic Testing (RT), or industrial radiography, is a nondestructive testing (NDT) method of inspecting materials for hidden flaws by using the ability of short wavelength electromagnetic radiation (high energy photons) to penetrate various materials.